May , 13 2023
The cleanroom panel consists of several parts, among which the panel plays a vital role. The panel materials are color-coated steel panel, stainless steel panel, film-coated panels, aluminum-magnesium-manganese alloy panels, etc. Currently, the most widely used panel material is color-coated panels. The color-coated panel is a product made of various panels as the substrate after surface...
May , 18 2023
MGO panel is composed of magnesium oxide, magnesium chloride, 2 layers of glass fiber cloth + 2 layers of non-woven fabric + wood chips / EPS + water, with fireproof, waterproof, tasteless, non-toxic, non-freezing, Non-corrosion, non-cracking, unchanged, non-combustible, high-strength, convenient construction, long service life, etc., can also be combined with a variety of thermal insulation ...
May , 29 2023
Gypsum panel raw materials are DSG, starch, foaming agent, kraft paper, etc. Standard paper faced gypsum panel consists of a face paper, a back paper and a gypsum core. 50mm double gypsum rockwool cleanroom panel has a fire resistance limit of 1 hour. Class A combustion performance. Standard paper faced gypsum panel: Standard paper faced gypsum panel consists of a face pap...
Jun , 11 2023
1. Composition Gypsum panel: raw materials for gypsum panel are DSG, starch, foaming agent, kraft paper, etc. Standard paper faced gypsum panel consists of face paper, back paper and gypsum core MGO panel: MGO panel is composed of magnesium oxide + magnesium chloride + 2 layers of grid cloth + 2 layers of non-woven fabric 2. Fire performance Gypsum panel: 50mm metal surfac...
Jun , 14 2023
Surface The surface of cleanroom panel is clean, free of glue marks, material marks, oil stains and cutting burrs Panel (1) The surface of the panel is smooth, the color is uniform, and there is no obvious color difference, unevenness, warping, and deformation (2) There are no obvious scratches, bumps and scars on the rest of the panels (3) Replacement of panels in the production of...
Jun , 19 2023
1. Heat transfer coefficient When metal-faced sandwich panels are used as exterior walls and ceilings, cold bridges and condensation should not occur during use 2. Bond strength and peel performance The bonding strength between the panel and the core material of the sandwich panel should not be less than 0.06MPa Peeling performance: During the experiment, the sandwich material bonded on the surfac...
online service
info@cnsterilezoom.com
English 
français
Deutsch
русский
español
العربية
日本語
한국의
ไทย
हिन्दी