Feb , 15 2019
In the production process of clean windows, due to the difference in temperature difference, humidity and sealing treatment, the produced window will have corresponding problems during use, such as fogging. After a long period of use, the clean windows of most of the market will have different degrees of fog, affecting the window effect and use. Cnsterilezoom Clean Window： 1、Cnsterilezoom's double...
Read More
-
Feb , 18 2019
This product can replace the return air column and the 100-thick hollow shrapnel wall in the small room (the dressing off the shoe buffer room). The return air module is processed in the factory, and the site is spliced like our manual board, which is convenient and quick to install. Later, according to customer needs, the product is easy to clean and the air volume is adjustable. Unique advantage...
-
Feb , 21 2019
The high-quality clean door is an indispensable auxiliary equipment in the clean room. Its quality will directly affect the cleanliness level of the clean room, such as sealing performance, non-corrosive, not easy to accumulate dust, easy to clean, no dead angle. Sealing performance is a key factor affecting the cleanliness level. Problem: The seals around the clean door of the market are made of ...
-
Feb , 25 2019
In the process of construction and use, the clean panels may be partially damaged and need to be replaced or repaired. Moreover, partial walls need to be removed because of the change of process equipment and the layout adjustment of the clean room, but the traditional clean panel is difficult to disassemble partially， which cause a lot of problems to the construction party and customers. Based on...
-
Feb , 27 2019
For clean rooms, GMP Article 49 stipulates that the inner surface (wall, floor, ceiling) of the clean area should be smooth and smooth, free of cracks, tightly interfaced, free of particulate matter, to avoid dust accumulation, easy to clean, and should be carried out if necessary disinfection. The common clean room is that the modular wall panel is connected with the aluminum profile to form a cl...
-
Mar , 07 2019
This product is widely used in the pharmaceutical, electronic, aerospace, military and other industries, using HPL Wall Systems .The system is connected by aluminum profiles, which has a simple structure and convenient disassembly. The Modular Cleanroom Wall System is a sandwich structure, which can be filled with rock wool, paper honeycomb, aluminum honeycomb and other materials. It is perfectly ...
-
Mar , 12 2019
Among the standards for clean room construction acceptance, 4.3.4 Article 7 is written to the metal cleanroom panel and should not be opened at the site. All kinds of holes on the panel should be cut and squared, and the edges should be evenly sealed. Apply sealing glue to the cutting edge of the filling material. Currently existing problems: 1. It is difficult to be modularized, standardized and ...
-
Mar , 14 2019
The HPL clean door for the clean room is a 50 mm TCK structure. The door frame is made of aluminum cutting and splicing. It is flush with the wall panel, dust-free and easy to clean. Our clean room door can be connected to the brick wall. With a pull-down bottom seal to ensure air tightness, mainly used in clean rooms for pharmaceuticals, microelectronics, laboratories, hospitals, etc. The HPL pan...
online service
info@cnsterilezoom.com
English 
français
Deutsch
русский
español
العربية
日本語
한국의
ไทย
हिन्दी